Home ProductsTungsten Carbide Wear Parts

High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel

High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel

    • High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel
    • High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel
    • High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel
    • High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel
  • High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel

    Product Details:

    Place of Origin: China
    Brand Name: HGalloytool
    Certification: ISO9001:2008
    Model Number: Customized

    Payment & Shipping Terms:

    Minimum Order Quantity: 5 Kg
    Packaging Details: Plastic Boxes Inside and Cartons Outside
    Delivery Time: 20~30 Days after Your Order Confirmed
    Payment Terms: L/C, T/T
    Supply Ability: 20000 Kgs Per Month
    Contact Now
    Detailed Product Description
    Product Name: Tungsten Carbide Wear Parts Grade: YG6, YG8, YG6X Etc.
    Material: 100% Virgin Tungsten Carbide Physical Performance: High Hardness , High Wear Resistance
    Type: Power Tool Parts Model Number: Customized
    Application: Mould, Plates, Cutting
    High Light:

    carbide wear parts

    ,

    tungsten carbide tire studs

    Tungsten Carbide Plates of High Wear-resistance Used for Punching Dies

     

    Product Description

     

    Product Name Tungsten Carbide Custom Wear Parts and Preform Blanks
    Material Tungsten Carbide
    Hardness 85HRA - 91HRA
    T.R.S 1800 - 3300N/mm2
    Application Metalworking, Stone working, Woodworking, Mining & Construction, Carbide protected wear parts, Oil industry equipment and aerospace industry, etc. any special application

     

    Grade and application

     

    Grade

    Density

    g/cm3

    Typical value Application scope

    Hardness

    HRA

    Bending

    strength

    YG3 15.10~15.30 92.5 1700 Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning and hole expanding.
    YG3X 15.10~15.30 93.6 1450 Best wear resistance in Tungsten and Cobalt alloy, but not good in anti-impact property, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed.
    YG6X 14.80~15.00 92.4 2000 Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machining for normal cast iron.
    YG6 14.80~15.00 91.1 2100 High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining.
    YG6A 14.8~15.00 92.8 1850 Belong to small granule alloy, high wear resistance, suitable for semi-finish machining of cold and hard cast iron, non-ferrous and alloy, as well as semi-finish machining and finish machining for quenched steel, alloy steel
    YG8 14.6~14.80 90.5 2300 High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed.
    YG522 14.20~14.40 92.5 2000 High wear resistance, and high strength, special grade for bamboo and wood processing, also suitable for non-ferrous and non-metal material cutting process.
    YG546 14.55~14.75 90.5 2700 High flexibility and high strength, withstand high impact load, suitable for stainless steel and cast iron rough processing
    YG610 14.60~14.80 93.5 2000 High wear resistance and high hardness, suitable for cast iron, high temperature alloy, quenched material cutting continuous and discontinuously.
    YG640 13.10~13.30 91.5 2300 Impact resistance and anti-oxidant, suitable for large cast piece cutting continuous and discontinuously, and anti-heat steel, high strength steel milling and digging.
    YG643 13.60~13.80 93.3 1700 High wear resistance, high anti-stick property, suitable for cast iron, high temperature cast iron, high temperature alloy, stainless steel, quenched steel and non-ferrous processing.
    YG813 14.30~14.50 92 2200 Good wear resistance, high bending strength resistance and anti-stick property, suitable for processing high temperature alloy, stainless steel and high Manganese steel and other material.

     

    Product show

    High Density Tungsten Carbide Wear Plates Polished And Blank Board / Panel 0

     

     

    Welcome to contact us

     

    Mr. Yong Zhou

    Tel: +86-0731-28260779 4008601520

    Mob & Wechat: +86 13973392040

    Fax: +86-731-28487050

    Whatsapp ID: +86 13973392040

    E-mail: alloytool@163.com

    QQ: 58048842

    Web: http://www.alloytool.com

    Province/State: Hunan

    Address: No. 88 Kaide Road, Hetang District, Zhuzhou City, Hunan Province, China

     

    Contact Details
    Zhuzhou HGtool Tungsten Carbide Co.,Ltd.

    Contact Person: Mr. Zhou

    Tel: +8613973392040

    Fax: 86-731-28487050

    Send your inquiry directly to us (0 / 3000)