|Place of Origin:||Hunan, China (Mainland)|
|Minimum Order Quantity:||5 KG|
|Packaging Details:||Plastic Boxes Inside and Cartons Outside|
|Delivery Time:||20~30 Days after Your Order Confirmed|
|Supply Ability:||20000 Kilogram per Month|
|Model Number:||Various||Shaping Mode:||Forging Mould|
|Feature:||High Wear Resistance & Good Heat And Corrosion Resistance||Shape:||Cylinder|
|Usage:||Drawing Steel / Non-ferrous Wires||Grade Recommendation:||YG11 G15 YL50|
|Key Word:||Tungsten Carbide Wire Drawing Dies|
carbide wire drawing dies,
wire drawing dies
Tungsten Carbide Wire Drawing Dies for Wire Drawing Application
The Tungsten carbide wire drawing dies are made by 100% virgin raw material. The tungsten carbide has low impurity content so the carbide wire drawing die nibs won’t crack easily. With HIP (Hot Isostatic Press) process to ensure the stable microstructure, the service life time of carbide wire drawing die nibs is longer. So die change is less and it can improve the working & production efficiency.
The carbide wire drawing dies have wide application and they can be used for drawing copper, aluminum, steel, spiral wires, ferrous and nonferrous wires, rods and tubes, etc.
The carbide wire drawing dies can be covered with steel casing as per request.
Tungsten carbide dies are a wise economical choice for steel wire and other large-size wire drawing applications that make cost savings a priority over die wear resistance and wire surface finish.
HGalloytool is supplied both carbide dies in blanks and finshed carbide drawing dies with steel case.
Grade and Applications:
|TRS N/ mm²||Density g/ cm³||Applications recommended|
|YG6X||92||1800||14.9||It can be used to make steel wires, non-ferrous metal wires or bars material with less than 6.0mm diameter.|
|YG6||90.5||2000||14.9||It can be used for steel wires, non-ferrous metal and alloy bars under 20mm diameter, and can also be used for drawing pipes with diameter of less than 10mm.|
|YG8||90||2200||14.7||Can be used in steel, non-ferrous metal and alloy bars and pipes, also can be used in manufacturing machinery parts, tools and vulnerable parts.|
|YG11||88.5||2300||14.4||It can be used for high compression steel rods and steel pope drawing, and the top hammer, perforation and stamping dies of working under greater stress.|
|YG20||85||2800||13.6||It can be used for stamping die, such as punching watch parts, stamping battery shell, tooth paste mould, small size steel ball, screw, nut, etc.|
|YG20C||83.5||2800||13.6||It can be used in standard parts, bearings, tools and other industries.|
|TL40.4||82||3000||13.3||It can be used in standard parts, bearings, tools and other industries for cold forging, cold pressing, cold pressing mould, warhead and shell stamping dies.|
Outmost care is taken while designing the profile of die as per standards and customer requirements. Mirror polish is done for better surface quality of output wire from die. The Automation used while the manufacturing of the size of the dies guarantees the tolerance in 0.001mm.
Contact Person: Mr. Zhou