|Place of Origin:||Hunan, China (Mainland)|
|Minimum Order Quantity:||5 kg|
|Packaging Details:||Boxes Inside and Cartons Outside|
|Delivery Time:||20~30 Days after Your Order Confirmed|
|Payment Terms:||L/C, T/T|
|Supply Ability:||40000 Kilograms per month|
|Product Name:||Tungsten Carbide Hardfacing Electrodes||Material:||Tungsten Carbide And Copper|
|Application:||Wear-resistant Parts||Particle Size:||10-400 Mesh|
|Length:||290-400mm, 290mm To 400mm||Welding Current:||140~220 A|
|Diameter:||8 To 15mm, 9 To 15mm|
tungsten carbide brazing rod,
alloy welding rods
YD type Tungsten carbide welding rod with nickel-copper alloy
YD type tungsten carbide welding rod is composed of sintered carbide and elastomer alloy.A special flux layer is applied and colored to determine particle size.Sintered carbide particles are mainly cobalt-bearing tungsten carbide with hardness of hra89-91.The matrix metal is "nickel-copper" alloy with tensile strength of 690mpa and hardness of HB≥160.
Cemented carbide or cemented carbide powder was prepared by sintering nickel/silver/copper alloy.Cemented carbide or cemented carbide fracture particles have good wear resistance and cutting performance.Hard alloys with sharp edges can be used for cutting conditions, and hard alloys with slightly blunt edges can also be used for cutting.
Tungsten Carbide Composition Welding Rod Grade and Applications
|Grain size um||
Physial Mechanical Properties
|WC||Co||Others||Density g/cm3||Hardness (HRA)||T.R.S N/mm2|
Tungsten Carbide Composition Welding Rod Production process
Application can Cases
Welding rod is widely used, which can realize a variety of materials, profiles and joints in a variety of forms of welding.
1, The welding of butt joint, corner joint, lap joint, t-joint and other joint forms can be realized.
2, It is suitable for flat welding.
3, it can surfacing welding on the parts with wear and other failure, so as to get the surface surfacing layer with shallow melting, flat surface and excellent performance.
4, It can be achieved without groove 1 ~ 6mm thick metal sheet single welding double molding.
|Q1: Are you a factory or a trading company?|
|A: We are a factory. We have been focusing on Tungsten Carbide for over 20 years.|
|Q2:What is your principle for the samples?|
|A: We offer free samples if you are willing to pay the freight.|
|Q3:What is your delivery time?|
|A: Generally it is 5 to 7 days if your required goods are in stock, otherwise it takes 20 to 30 days when there is no stock.|
|Q4:Do you have any test reports or certificates?|
|A: Yes, we can offer certificate of ISO9000:2008, we also report our test results for your reference.|
|Q5: Do you provide after-sale service?|
|A: Yes. So if you find any problem after using our cutting tools, please do not hesitate to tell us, we’ll help you to solve it as soon as possible. Your any feedback to products is our way to improvement|
|Q6: What should I do before contacting?|
A: You can provide specific dimensions or drawings, and tell us the quantity of each item, and your application of this item. Other special requirements is also available.
|Q7:How to contact us?|
|A: Directly contact us from inquiry, or by whatsapp or wechat. Other ways you can also provide us.|
Packaging & Delivery
Plastic Boxes Inside and Cartons Outside
Generally it is 5-7 days if the goods are in stock.
Or it is 20-30 days if the goods are not in stock, it is according to quantity.
Contact Person: Mr. Zhou