|Place of Origin:||Hunan, China (Mainland)|
|Minimum Order Quantity:||5 kg|
|Packaging Details:||Boxes Inside and Cartons Outside|
|Delivery Time:||within 20 workdays after payment done|
|Payment Terms:||L/C, T/T|
|Supply Ability:||40000 Kilograms per month|
|Product Name:||Tungsten Carbide Welding Rod||Material:||Tungsten Carbide And Copper|
|Grade:||K10 K20 K30 YG6 YG8 YG11C All Size Available||Color:||Gold|
|Application:||Wear-resistant Parts||Particle Size:||10-400 Mesh|
|Length:||290-400mm, 290mm To 400mm||Diameter:||8 To 15mm, 9 To 15mm|
tungsten carbide brazing rod,
alloy welding rods
Copper and Nickel Tungsten Carbide composite alloy welding rod
YD type tungsten carbide welding rod is composed of sintered carbide and elastomer alloy.A special flux layer is applied and colored to determine particle size.Sintered carbide particles are mainly cobalt-bearing tungsten carbide with hardness of hra89-91.The matrix metal is "nickel-copper" alloy with tensile strength of 690mpa and hardness of HB≥160.
Cemented carbide or cemented carbide powder was prepared by sintering nickel/silver/copper alloy.Cemented carbide or cemented carbide fracture particles have good wear resistance and cutting performance.Hard alloys with sharp edges can be used for cutting conditions, and hard alloys with slightly blunt edges can also be used for cutting.
Tungsten Carbide Composition Welding Rod Grade and Applications
|Grade||Density||T.R.S||Hardness||Properties & Applications|
|YL50||13.86||2060||1095.0||for manufacturing punching dies and tools.|
for manufacturing milling cutters for machining PCB.
also for manufacturing various kinds of solid cemented carbide tools for machining
glass fiber, wood, plastics, paper and brass, Al alloy etc.
for manufacturing micro-drills with diameter less than 0.8mm for machining PCB.
also for manufacturingvarious kinds of solid cemented carbide tools formachining
glass fiber, wood, plastics, paper and drass, Al alloy etc.
for manufacturing micro drills for machining PCB.
It is also suitable for manufacturing various for machining glass fiber,
wood, plastics, paper and brass, Al alloy etc.kinds of solid cemented carbide tools.
for manufacturing solid cemented carbide tools for
machining steels that are corrosion and heat resistant steel,stainless steel, titanium alloy,
steels that are corrosion and heat resistant steel, stainless steel, titanium alloy,
|YF06||14.86||3800||1800.0||for manufacturing drills with big diameters of 3.2-6.3mm for machining PCB, drills of 0.8-3.2mm and mills, and it is also suitable for making solid carbide PCB, drills of 0.8-3.2mm as carbon fibre, etc.|
for manufacturing micro-drills for machining PCB.
It is also suitable for manufacturing varous kinds of solid cemented
carbide tools for machiningglass fiber, wood, plastics, paper and brass, Al alloy, etc.
|YG6X||14.8||1560||91.0||for manufacturing solid carbide tools and wear parts.|
|YG8||14.6||1840||89.5||for manufacturing carbide core rods and wear parts.|
for manufacturing various kinds of solid cemented carbide tools for machining heat-resistant alloys and Ti alloy etc.
It is also suitable for manufacturing micro drills for machining PCB.
Tungsten Carbide Composition Welding Rod Production process
Application can Cases
Welding rod is widely used, which can realize a variety of materials, profiles and joints in a variety of forms of welding.
1, The welding of butt joint, corner joint, lap joint, t-joint and other joint forms can be realized.
2, It is suitable for flat welding.
3, it can surfacing welding on the parts with wear and other failure, so as to get the surface surfacing layer with shallow melting, flat surface and excellent performance.
4, It can be achieved without groove 1 ~ 6mm thick metal sheet single welding double molding.
|Q1: Are you a factory or a trading company?|
|A: We are a factory. We have been focusing on Tungsten Carbide for over 20 years.|
|Q2:What is your principle for the samples?|
|A: We offer free samples if you are willing to pay the freight.|
|Q3:What is your delivery time?|
|A: Generally it is 5 to 7 days if your required goods are in stock, otherwise it takes 20 to 30 days when there is no stock.|
|Q4:Do you have any test reports or certificates?|
|A: Yes, we can offer certificate of ISO9000:2008, we also report our test results for your reference.|
|Q5: Do you provide after-sale service?|
|A: Yes. So if you find any problem after using our cutting tools, please do not hesitate to tell us, we’ll help you to solve it as soon as possible. Your any feedback to products is our way to improvement|
|Q6: What should I do before contacting?|
A: You can provide specific dimensions or drawings, and tell us the quantity of each item, and your application of this item. Other special requirements is also available.
|Q7:How to contact us?|
|A: Directly contact us from inquiry, or by whatsapp or wechat. Other ways you can also provide us.|
Packaging & Delivery
Plastic Boxes Inside and Cartons Outside
Generally it is 5-7 days if the goods are in stock.
Or it is 20-30 days if the goods are not in stock, it is according to quantity.
Contact Person: Mr. Zhou