Home ProductsCarbide Welding Rod

Cemented Tungsten Carbide Welding Rod Good Thermal & Chemical Stability

Cemented Tungsten Carbide Welding Rod Good Thermal & Chemical Stability

Cemented Tungsten Carbide Welding Rod Good Thermal & Chemical Stability

Product Details:

Place of Origin: Hunan, China (Mainland)
Brand Name: HGalloytool
Certification: ISO9001:2008
Model Number: YF08 Carbide Welding Rod

Payment & Shipping Terms:

Minimum Order Quantity: Negotiation
Price: Negotiation
Packaging Details: Boxes Inside and Cartons Outside
Delivery Time: 20~30 Days after Your Order Confirmed
Payment Terms: L/C, T/T
Supply Ability: 20000 Kilograms per month
Contact Now
Detailed Product Description
Product Name: Carbide Welding Rod Material: Cemented Tungsten Carbide
Grade: YF08 Color: Gold
Feature: Good Thermal & Chemical Stability Density: 14.55-14.65 G/cm³
Hardness HV3: 1800 Grain Size Of WC: 0.4-0.6 Um
High Light:

tungsten carbide brazing rod

,

alloy welding rods

Cemented Tungsten Carbide Welding Rod Good Thermal & Chemical Stability

 

Tungsten Carbide Welding Rod Application

  1. Thoroughly clean the base metal.
  2. Lightly heat base material then apply flux.A little heat before applying powdered flu: helps it stick to the base material, as the torch has a tendency to blow the flux away.
  3. Gently heat the base material to melt flux, observe its coverage and oorrect any bart
  4. Applying a coating of Tung chip Tinning Rod can assist in the adhesion of th Composite Rod to the base material. The tinning rod can also be used to fill voids an give a smooth appearance if required.
  5. Heat base material until it just begins to turn red. At this point begin applying rod t base material. The Tung chip Tinning Rod should flow onto the base material. If the Tunt chip Tinning Rod balls up, it is not hot enough. Adversely, if the Tung chip Tinning runs across the base material it is too hot. Care must be taken to maintain the prope temperature of the base material during application.
  6. Composite Rod is sluggish and does not flow easily.How it flows can vary considerable depending on the size and percentage of the Tung chip Tungsten Carbide Grit in the rod Explanation of the exact technique for application is difficult but certain general advice can be given.Work slowly and gently with as little heat as possible.Allow the Composit Rod to precede the torch rather than follow it.If necessary use the rod as a pushing packing and smoothing tool while applying just enough heat to melt the matrix.It woulk probably be beneficial for the beginner to practice on a scrap piece of steel before tackling the actual parts to be hardfaced.With practice good coatings can easily be made.

Tungsten Carbide Welding Rod Grade

 

Grade Chemical composition Physical data Structure
WC
%
Co
%
Others
%
Density
g/cm³
Hardness
HV3
TRS
Mpa
Grain size
of WC (um)
YG8 92.0 8.0   14.6-14.90 89.5 1840 1.2-1.6
YG6X 93.5 6.0 0.5 14.80-15.10 ≥91 1560 ≤1.0
YF06 93.5 6.0 0.5 14.86-14.96 ≥1800 3800 0.4-0.6
YF08 91.4 8.0 0.6 14.55-14.65 1800 3900 0.4-0.6
YU06 93.0 6.0 1.0 14.70-14.80 ≥2050 3000 0.2-0.4
YU08 91.0 8.0 1.0 14.56-14.65 1900 4000 0.2-0.4
YU09 89.8 9.0 1.2 14.36-14.50 ≥1950 3900 0.2-0.4
YU12 87.0 12.0 1.0 14.05-14.15 ≥1750 4000 0.2-0.4
YL10.1 93.5 6.0 0.5 14.88-15.04 1580±50 2500 1.2-1.7

 

 

Q&A

 

Q1: Are you a factory or a trading company?

A: We are a factory. We have been focusing on Tungsten Carbide for over 20 years.

 

Q2:What is your principle for the samples?

A: We offer free samples if you are willing to pay the freight.

 

Q3:What is your delivery time?

A: Generally it is 5 to 7 days if your required goods are in stock, otherwise it takes 20 to 30 days when there is no stock.

 

Q4:Do you have any test reports or certificates?

A: Yes, we can offer certificate of ISO9000:2008, we also report our test results for your reference.

 

Q5: Do you provide after-sale service?

A: Yes. So if you find any problem after using our cutting tools, please do not hesitate to tell us, we’ll help you to solve it as soon as possible. Your any feedback to products is our way to improvement

 

Q6: What should I do before contacting?

A: You can provide specific dimensions or drawings, and tell us the quantity of each item, and your application of this item. Other special requirements is also available.

 

Q7:How to contact us?

A: Directly contact us from inquiry, or by whatsapp or wechat. Other ways you can also provide us.

 

Packaging & Delivery:

 

Packing Details:

Plastic Boxes Inside and Cartons Outside

 

Port:

Guangzhou/Shanghai/Shenzhen/Dalian etc.

 

Delivery Details:

Generally it is 5-7 days if the goods are in stock.

Or it is 20-30 days if the goods are not in stock, it is according to quantity.

Contact Details
Zhuzhou HGtool Tungsten Carbide Co.,Ltd.

Contact Person: Mr. Zhou

Tel: +8613973392040

Fax: 86-731-28487050

Send your inquiry directly to us (0 / 3000)